Products

News

You are here: Home » Products » Grain Dryer » 5HGM-30S Low Temperature Circulation Type Grain Dryer

Product Category

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

5HGM-30S Low Temperature Circulation Type Grain Dryer

1. Japanese drying technology, four drying parts, two blowers, higher drying efficiency;
2. Low temperature type, low broken rate;
3. Batched and circulation type grain dryer;
4. Indirect heating and clean hot air for drying material without any pollution.
Availability:
Quantity:
  • 5HGM-30S

  • FOTMA

Product Description

The 5HGM series grain dryer is low temperature type circulation batch type grain dryer. The dryer machine is mainly used to dry rice, wheat, corn, soybean etc. The dryer machine is applicable to various combustion furnaces and coal, oil, firewood, straw of crops and husks can all be used as heat source. The machine is automatically controlled by computer. The drying process is dynamically automatic. Besides, the grain drying machine is equipped with automatic temperature measuring device and moisture detecting device, which greatly increase the automation and ensure the quality of the dried cereals. In addition to drying the paddy, wheat, it can also dry rapeseeds, buckwheat, corn, soybean, cottonseed, sunflower seeds, sorghum, mung bean and other seeds, as well as some rule grains and crops with good fluidity and moderate volume.


Features:

1.Feeding and discharging grains from the top of dryer: Cancel the top auger, grain will directly flow to the drying part, avoid mechanical failure, lower power consumption and reduce the paddy broken rate.

2.Crosswise eight-groove drying technology: Thin drying layer, lower drying cost while higher drying efficiency.

3.Resistance-type online moisture meter: Error rate is ±0.5 only (Deviation for raw paddy moisture is within 3% only), very accurate and reliable moisture meter.

4.The dryer comes with fully automatic computer controlling system, easy on operation, high automation.

5.Double lower speed auger design could effectively reduce the auger failure rate and grain broken rate, also reduce the dryer height;

6.The elevator uses the large capacity polymer material bucket, higher reliability. The lower linear speed reduces the broken rate effectively during conveying process.

7.Equipped with four drying parts, double blowers, and the hot air enters the dryer from two sides, drying speed is fast and the quality of dry paddy is good.


Technical Parameters

Model

5HGM-30S

Type

Batch type, Circulation, Low temperature

Volume(t)

30.0

(Based on paddy 560kg/m3)

31.5

(Based on wheat 680kg/m3)

Overall dimension(mm)(L×W×H)

6594×4108×14166

Structure weight(kg)

6350

Hot air source

Burner (diesel or natural gas);

Hot air furnace (coal, husk, straw, biomass, etc.);

Boiler (steam or thermal oil).

Blower motor(kw)

2*7.5

Total power of motors(kw)/ Voltage(v)

20.15/380

Time of feeding(min)

Paddy

55~70

Wheat

57~72

Time of discharging(min)

Paddy

53~68

Wheat

58~70

Moisture reduction rate

Paddy

0.4~1.0% per hour

Wheat

0.4~1.0% per hour

Automatic control and safety device

Automatic moisture meter, automatic ignition, automatic stop, temperature control device, fault alarm device, full grain alarm device, electrical overload protection device, leakage protection device

Remarks:

1. The moisture reduction rate listed above is reference value. Effected by the air temperature outside, relative humidity, the variety of drying and so on, the actual value will be a little different:

(1) Raw grain condition: moisture < 30%, straw mixed rate < 2%, other inclusion mixed rate < 1%. The parameters may be changed when the raw grain with high moisture.

(2) The parameters using environmental conditions is air temperature 20℃, relative humidity 60%~80%.

2. The heat source is 0 # diesel (air temperature under 10 ℃ use - 10 # diesel) burner to direct heating.


Previous: 
Next: 
Product Inquiry