Customer Service Line +86-27-67848665

Search

Products

News

You are here: Home » Products » Grain Dryer » 5HGM Series 15-20 ton/ batch Circulation Grain Dryer

Product

Share to:

5HGM Series 15-20 ton/ batch Circulation Grain Dryer

1.Capacity, 15-20t per batch;
2.Low temperature type, low broken rate;
3.Batched and circulation type grain dryer;
4.Indirect heating and clean hot air for drying material without any pollution.
Availability:
Quantity:
  • 5HGM
  • FOTMA

Product Description

The 5HGM series grain dryer is low temperature type circulation batch type grain dryer. The dryer machine is mainly used to dry rice, wheat, corn, soybean etc. The dryer machine is applicable to various combustion furnaces and coal, oil, firewood, straw of crops and husks can all be used as heat source. The machine is automatically controlled by computer. The drying process is dynamically automatic. Besides, the grain drying machine is equipped with automatic temperature measuring device and moisture detecting device, which greatly increase the automation and ensure the quality of the dried cereals. In addition to drying the paddy, wheat, it can also dry rapeseeds, buckwheat, corn, soybean, cottonseed, sunflower seeds, sorghum, mung bean and other seeds, as well as some rule grains and crops with good fluidity and moderate volume.




Features:

1. Feeding and discharging grains from the top of dryer: Cancel the top auger, grain will directly flow to the drying part, avoid mechanical failure, lower power consumption and reduce the paddy broken rate.

2. Crosswise eight-groove drying technology: Thin drying layer, 20% cost is reduced and 15% drying efficiency is increased.

3. Resistance-type online moisture meter: Error rate is ±0.5 only (Deviation for raw paddy moisture is within 3% only), very accurate and reliable moisture meter.

4. Top and lower dust removal function, means twice dust removal in the drying process, make the dried grain much cleaner.

5. The dryer comes with fully automatic computer controlling system, easy on operation, high automation.

6. With standard grain discharging hole for emergency discharging, to improve the discharging efficiency and ensure the grain security;

7. Big and lower speed auger design could effectively reduce the auger failure rate and grain broken rate;

8. The elevator uses the large capacity polymer material bucket, higher reliability. The lower linear speed reduces the broken rate effectively during conveying process.


Technical Parameter

Model

5HGM-15

5HGM-20

Type

Batch type, circulation

Batch type, circulation

Volume(t)

15.0

(Based on paddy 560kg/m3)

20.0

(Based on paddy 560kg/m3)

16.5

(Based on wheat 680kg/m3)

21.5

(Based on wheat 680kg/m3)

Overall dimension(mm)(L×W×H)

5034×3310×10414

5034×3310×10914

Weight(kg)

2580

4050

Drying capacity (kg/h)

1500-1800

(Moisture from 25% to 14.5%)

2000-2500

(Moisture from 25% to 14.5%)

Blower motor(kw)

7.5

7.5

Total power of motors(kw)/ Voltage(v)

11.1/380

11.1/380

Time of feeding(min)

Paddy

45~60

55~70

Wheat

47~62

57~72

Time of discharging(min)

Paddy

43~58

53~68

Wheat

48~60

58~70

Moisture reduction rate

Paddy

0.4~1.0% per hour

0.4~1.0% per hour

Wheat

0.4~1.0% per hour

0.4~1.0% per hour

Automatic control and safety device

Automatic moisture meter, automatic ignition, automatic stop, temperature control device, fault alarm device, full grain alarm device, electrical overload protection device, leakage protection device

Remarks:

1. The moisture reduction rate listed above is reference value. Effected by the air temperature outside, relative humidity, the variety of drying and so on, the actual value will be a little different:

(1) Raw grain condition: moisture < 30%, straw mixed rate < 2%, other inclusion mixed rate < 1%. The parameters may be changed when the raw grain with high moisture.

(2) The parameters using environmental conditions is air temperature 20℃, relative humidity 60%~80%.

2. The heat source is 0 # diesel (air temperature under 10 ℃ use - 10 # diesel) burner to direct heating.


Previous: 
Next: 
Product Inquiry
QUESTION? LET US HELP.

Simple choose a support option from the icons below :
FOLLOW US ON:
(Under construction)
Copyright 2004-2022 © Hubei FOTMA Machinery Co.,Ltd